AGAurora Garage Floors 📞 Call
Basement Floors

Basement & Interior Floors in Aurora

Bright, seamless, easy-clean coatings for basements, laundry rooms, gyms and living space — no grout lines, no cold bare concrete.

📞 (720) 262-2551 Get My Free Quote
✓ Diamond-Ground Prep
✓ Won’t Peel or Yellow
✓ One-Day Installs
✓ Written Warranty

Get a Free Instant Quote

Tell us about your floor — we reply fast.

4.8 ★Google Rated
1-DayInstalls
DiamondGround Prep
HonestUpfront Pricing
FreeOn-Site Quotes

Basement & Interior Floors Done Right

Bare or painted basement concrete is cold, dusty and stains the moment anything spills. A coated floor turns that raw slab into a finished, easy-to-clean surface that resists moisture from below — the way a basement floor should. We moisture-test the slab first — the step most installers skip and the reason basement coatings fail — then install a seamless system with the flake or metallic finish you want.

  • Free on-site quote & moisture test
  • Full diamond-grind surface prep
  • Crack, pit & spall repair
  • UV-stable, hot-tire-proof topcoat
  • Clean, one-day install on most floors
Get My Basement Floors Quote
Basement & Interior Floors project in Aurora
What It Costs

Basement Floors Pricing in Aurora

Basement and interior floors generally run $5–$7 per square foot depending on square footage, slab moisture and finish — we test and quote each one free. Final pricing depends on square footage, slab condition, the coating system and finish — so we give you a free written quote before any work begins. No surprises after we start.

Get My Free Quote

Why Homeowners Choose Us for Basement Floors

🔩

Diamond-Ground, Not Just Rolled On

Peeling floors come from skipped prep. We mechanically diamond-grind every slab to a clean profile so the coating bonds to the concrete — not to dust, sealer or old paint.

🚗

No Hot-Tire Pickup

Cheap kits and DIY epoxy lift right off under hot tires. Our polyaspartic and full-flake systems are rated for it — park on it and it stays put.

☀️

UV-Stable, Won't Yellow

Standard epoxy ambers and chalks in sunlight. Our polyaspartic topcoats are UV-stable, so the floor by the open garage door matches the floor in the back.

Buyer’s Guide

How to Choose a Floor Coating Installer

Most failed floors fail for the same few reasons. Here’s what to check before you hand anyone a deposit:

1

Ask how they prep the slab

The only right answers are diamond grinding or shot blasting. Acid etching and 'clean and roll' are why floors peel. If they don't grind, keep calling.

2

Make sure they moisture-test

Concrete releases water vapor. A pro tests the slab and picks a primer to match. Skip it and the best coating in the world will bubble and lift.

3

Know polyaspartic vs. epoxy

Epoxy is cheaper but ambers and cures slowly; polyaspartic installs in a day, resists UV and hot tires, and lasts longer. Ask what system they're quoting and why.

4

Get the full system in writing

'Epoxy floor' means nothing. A real quote lists grinding, crack repair, base coat, flake broadcast and clear topcoat — plus the total mil thickness.

5

Beware the box-store price

A cheap one-day 'special' is usually a thin, water-based coating that fails in a season. A ground-and-flaked polyaspartic floor costs more because it lasts years, not months.

Reviews

Rated 4.8 ★ by Aurora Homeowners

Read our reviews on Google →

★★★★★
“Jesus was recommended by our realtor and from his initial fair and upfront pricing to the quality of the finished product, I was very happy with the work. Even though I’m repainting all the walls, Jesus and his team still paid careful attention to detail and kept the epoxy on the floor. Highly recommend his work.”
Joshua Kee Google review
★★★★★
“Worked with Jesus to refinish our garage floor. He offered an honest price and began work immediately. His work is top notch. Gets my recommendation”
Blake Graham Google review
★★★★★
“I'm so pleased with the work from Jesus and his team. They showed up on time, were very professional! Great pricing- no back and fourth. Highly recommend him to finish your flooring!”
Gandhy Benitez Google review
More Services

Other Floor Coating Services

Garage Floor Coatings

Garage Floor Coatings

One-day polyaspartic & epoxy garage floors that shrug off hot tires, road salt and snowmelt — and won't peel like a box-store kit.

Learn more →
Commercial & Industrial Floors

Commercial & Industrial Floors

Fast-cure floors for shops, warehouses, showrooms and garages that go back into service the next day.

Learn more →
Metallic & Decorative Epoxy

Metallic & Decorative Epoxy

High-end metallic, marble-look and custom flake finishes for showrooms, retail, basements and statement garages.

Learn more →
FAQ

Frequently Asked Questions

How much does it cost to coat a garage floor?
A typical 2-car garage runs about $5–$7 per square foot installed — roughly $2,000–$4,000 — depending on the coating system, flake coverage and how much crack and moisture repair the slab needs. Every quote we give is free and in writing.
Polyaspartic or epoxy — which is better?
For most garages, polyaspartic. It installs in a single day, cures fast, resists UV so it won't yellow, and handles hot tires and road salt better than standard epoxy. Epoxy is a lower-cost base coat and still has its place — we'll tell you which system fits your floor and why.
How long does a floor coating take to install?
Most residential garage and basement floors are done in one day. You can usually walk on the floor the same evening and park on it in about 24–72 hours depending on the system and temperature.
Will it peel or lift like the kit I've seen fail?
Not when it's prepped right. Peeling almost always comes from skipped prep — a floor rolled over dust, sealer or old paint, or one that was never moisture-tested. We diamond-grind to clean concrete and test the slab first, which is exactly why our floors stay down.
How long will a professional coating last?
A properly installed, diamond-ground polyaspartic flake floor commonly lasts 15–20+ years in a residential garage, and we back it with a written warranty. Lifespan depends on the system and traffic — but it's measured in years, not the months you get from a DIY kit.
Do you coat basements, shops and commercial floors too?
Yes — garage floors are our most popular job, but we also coat basements and interior floors, commercial and warehouse floors, and install metallic and decorative finishes. Same prep-first process on all of them. Call (720) 262-2551 for a free quote.
Is epoxy flooring worth it for a garage?
For most homeowners, yes. A coated garage floor stops concrete dust, resists oil and chemical stains, cleans with a hose, and protects the slab from moisture and salt. It's one of the highest-return upgrades per dollar in the house, and a fresh flake floor is a real selling point when you list.
Can I put a coating over an old epoxy or painted floor?
Not directly — old coatings have to come off. We diamond-grind the existing paint or epoxy down to bare, profiled concrete, repair what's underneath, and install the new system on a clean slab. Coating over a failing coating just gives you two failing coatings.

Get Your Free Basement Floors Quote

Tell us about your floor and we’ll send a clear, written quote fast — no pressure, no obligation.

📞 Call (720) 262-2551 Get a Free Quote
📞 Call (720) 262-2551Free Quote